Creating a Windows 2012 R2 Target Device with Citrix Provisioning Services 7.8

Reading Time: 6 minutes

Citrix Provisioning Services (PVS) is a great way for running your virtual desktop infrastructure (VDI). In my recent blog here I showed you how to setup Citrix Provisioning Services 7.8.

Using Windows 2012 R2 as a VDI platform, you can easily give like 90% of your workers a full-functional desktop or Workspace. And because the concept is Server Based Computing (SBC or Shared Desktop), you can provision multiple full-functional desktops using just one Windows 2012 R2 server. Off course having just one Windows 2012 R2 Server is not ideal, but you get what I’m aiming at. In the end it is all about managing resources and being high-available.

In this blog I will show you how to create a Windows 2012 R2 target device running from Citrix Provisioning Services. I will then use this target device disk (vDisk) as a template (golden image) to create multiple target devices running from the same vDisk in another post using Citrix XenDesktop 7.8. For now let’s focus on creating the Windows 2012 R2 Target Device vDisk.

In this post I will show you how to:

  • Create a Windows 2012 R2 Target Device vDisk
  • Configure a Target Device to use said vDisk and boot from PVS

My lab setup:

  • Windows 2012 R2 server with Citrix Provisioning Services 7.8 installed (pvs01.vikash.nl)
  • Local domain (vikash.nl)
  • Domain controller (dc01.vikash.nl)
  • Hypervisor Hyper-V 2012 R2
  • Windows 2012 R2 Server with latest updates
  • All servers and desktops are running as virtual machines
  • DHCP running on my router
  • Citrix Provisioning Services Boot Disk (blog here)

Make sure that the virtual machine configured in Hyper-V for Windows 2012 R2 PVS target is setup as Gen 1 (generation 1) virtual machine, and that the network card is a Legacy network adapter. Otherwise the virtual machine will not be able to boot using PVS. Sources tell me that the next version of Citix Provisioning Services will be able to work with Gen 2 (generation 2) virtual machines in Hyper-V.

Target Device Installation

So let’s start by installing the Citrix Provisioning Services components in my Windows 2012 R2 virtual machine. Mount the Citrix Provisioning Services ISO using Hyper-V management console.

pvs78_w2012r2_target_01

Start the autorun.

pvs78_w2012r2_target_02

Choose Target Device Installation.

pvs78_w2012r2_target_03

Click again on Target Device Installation.

pvs78_w2012r2_target_04

Click on Install to install the required components.

pvs78_w2012r2_target_05

Click on Next to start the installation.

pvs78_w2012r2_target_06

Accept the License Agreement and click on Next.

pvs78_w2012r2_target_07

Enter your customer information and click on Next.

pvs78_w2012r2_target_08

Select the Destination Folder for installation and click on Next.

pvs78_w2012r2_target_09

Click on Install to complete the installation.

pvs78_w2012r2_target_10

Imaging Wizard

After the installation has completed, make sure to check the Launch Imaging Wizard box (if it is not checked automatically). Click on Finish.

pvs78_w2012r2_target_11

You are now presented with a welcome window. Click on Next.

pvs78_w2012r2_target_12

Enter the name of the PVS server. Make sure you have the right port and use the correct credentials for the PVS server. This can be a domain admin account, provided that they have admin rights on the PVS server. Because I am on my homelab I used my Administrator account. In my case I am using the IP-adress from my PVS server. If you are using a hostname, make sure it always resolves to the PVS server.

pvs78_w2012r2_target_13

Select Create a vDisk and click on Next.

pvs78_w2012r2_target_14

The Provisioning Services Imaging Wizard will create a new Target Device on the PVS server. Choose the correct Device Collection name. I my case I made a separate device collection for Windows 2012 R2 Target Devices. Click on Next.

pvs78_w2012r2_target_15

Specify the vDisk name and click on Next.

pvs78_w2012r2_target_16

Select the appropriate Windows Activation method for you. Click on Next

pvs78_w2012r2_target_17

Choose to image the entire boot disk, and click on Next.

pvs78_w2012r2_target_18

Select the option to Optimize the hard disk and then click on Next. You can adjust the options according to your needs, I choose the defaults because I my experience that is fine.

pvs78_w2012r2_target_19

You will be presented with a summary screen. Check that everything is entered correctly and then click Create.

pvs78_w2012r2_target_20

The wizard will create the vDisk and the target device on the PVS server, after optimising the virtual machine. It needs to restart the virtual machine to start the imaging process. Click on Continue.

pvs78_w2012r2_target_21

Now you will be asked to reboot the device. If you choose Yes the Imaging Wizard will restart the virtual machine. At this point you have to make sure that the virtual machine will boot from network or the PVS boot iso. If you choose No the virtual machine will be shut down. I choose No, so I could mount the PVS boot iso to the virtual machine. The Wizard will then shutdown the machine.

pvs78_w2012r2_target_22

Click on Yes to shutdown the virtual machine.

pvs78_w2012r2_target_23

Change Boot Settings Target Machine

Go to the Settings of the virtual machine. In my case that is the Hyper-V management console.

pvs78_w2012r2_target_24

Make sure the virtual machine boots from CD.

pvs78_w2012r2_target_25

The make sure you mount the PVS boot iso to the virtual CD of the virtual machine. Click on OK.

pvs78_w2012r2_target_26

No start the virtual machine and logon to let the Imaging Wizard continue.

pvs78_w2012r2_target_27

The Imaging Wizard will automatically continue.

pvs78_w2012r2_target_28

Click on Done when the Wizard finishes.

pvs78_w2012r2_target_29

Now go to your PVS console, select the Target Device properties.

pvs78_w2012r2_target_30

We can now boot the Target Device using our newly created vDisk. But before we do so we have to set it to boot from vDisk. Click then on OK.

pvs78_w2012r2_target_31

Restart the Windows 2012 R2 Target Device and you will see that it boots now using the PVS server and the vDisk.

pvs78_w2012r2_target_32

Now let’s check the status of the vDisk after logging in.

pvs78_w2012r2_target_33

We can see that we are now using the vDisk.

pvs78_w2012r2_target_34

Note that the vDisk is in Read/Write mode. This is because the Access Mode of the vDisk is Private. This is default after creating a vDisk. Adjust this before starting to provision multiple target devices using the same vDisk.

pvs78_w2012r2_target_35

This concludes this tutorial. Feel free to contact me of you have any questions or comments.

You can also follow me on twitter or add the rss feed from the blog and you will be notified when I add new posts.

Creating a Windows 2012 R2 Target Device with Citrix Provisioning Services 7.8 Read More

Creating a Windows 10 Target Device with Citrix Provisioning Services 7.8

Reading Time: 7 minutes

Citrix Provisioning Services (PVS) is a great way for running your virtual desktop infrastructure (VDI). In my recent blog here I showed you how to setup Citrix Provisioning Services 7.8.

In this blog I will show you how to create a Windows 10 target device running from Citrix Provisioning Services. I will then use this target device disk (vDisk) as a template (golden image) to create multiple target devices running from the same vDisk. I will cover this in another post using Citrix XenDesktop 7.8. For now let’s focus on creating the Windows 10 Target Device vDisk.

In this post I will show you how to:

  • Create a Windows 10 Target Device vDisk
  • Configure a Target Device to use said vDisk and boot from PVS

My lab setup:

  • Windows 2012 R2 server with Citrix Provisioning Services 7.8 installed (pvs01.vikash.nl)
  • Local domain (vikash.nl)
  • Domain controller (dc01.vikash.nl)
  • Hypervisor Hyper-V 2012 R2
  • Windows 10 desktop with latest updates
  • All servers and desktops are running as virtual machines
  • DHCP running on my router
  • Citrix Provisioning Services Boot Disk (blog here)

Make sure that the virtual machine configured in Hyper-V for Windows 10 PVS target is setup as Gen 1 (generation 1) virtual machine, and that the network card is a Legacy network adapter. Otherwise the virtual machine will not be able to boot using PVS. Sources tell me that the next version of Citix Provisioning Services will be able to work with Gen 2 (generation 2) virtual machines in Hyper-V.

Target Device Installation

Now we have to install the Citrix Provisioning Services components in the Windows 10 desktop from which we will create the vDisk.

Mount the PVS ISO on the Windows 10 virtual machine.

pvs78_w10_target_01

Start the autorun and choose Target Device Installation.

pvs78_w10_target_02

Click on Target Device Installation.

pvs78_w10_target_03

Click Install to install the requirements.

pvs78_w10_target_04

Click on Next to start the installation.

pvs78_w10_target_05

Accept the license agreement and click on Next.

pvs78_w10_target_06

Enter your customer information and click on Next.

pvs78_w10_target_07

Select the Destination Folder for installation and click on Next.

pvs78_w10_target_08

We are now ready to install. Click on Install.

pvs78_w10_target_09

After installation has finished, make sure to select Launch Imaging Wizard option and click on Finish.

pvs78_w10_target_10

Now the Imaging Wizard will start. Click on Next.

pvs78_w10_target_11

Enter the name of the PVS server. Make sure you have the right port and use the correct credentials for the PVS server. This can be a domain admin account, provided that they have admin rights on the PVS server. Because I am on my homelab I used my Administrator account.

pvs78_w10_target_12

Select Create a vDisk. Click Next.

pvs78_w10_target_13

The wizard will create a new target device on the PVS server. Choose a device collection to put the newly created target device in. Click on Next.

pvs78_w10_target_14

Enter a name for the vDisk. Select the the correct store and choose the vDisk type. Click on Next.

pvs78_w10_target_15

Choose the activation type for Windows 10. This depends on the license model you have from Microsoft. Click on Next.

pvs78_w10_target_16

Choose to image the entire boot disk. Click Next.

pvs78_w10_target_17

Select the option to Optimize the hard disk and then click on Next. You can adjust the options according to your needs, I choose the defaults because I my experience that is fine.

pvs78_w10_target_18

You will be presented with a summary screen. Check that everything is entered according to your needs and then click Create.

pvs78_w10_target_19

The wizard will create the vDisk and the target device on the PVS server, after optimising the virtual machine. It needs to restart the virtual machine to start the imaging process. Click on Continue.

pvs78_w10_target_20

Now you will be asked to reboot the device. If you choose Yes the Imaging Wizard will restart the virtual machine. At this point you have to make sure that the virtual machine will boot from network or the PVS boot iso. If you choose No the virtual machine will be shut down.

pvs78_w10_target_21

In my case I have to choose No because I can’t change the boot order of a Gen 1 Hyper-V virtual machine while it is powered on. Check if your hypervisor is able to adjust while the virtual machine is powered on.

So I have to adjust the settings of my virtual machine.

pvs78_w10_target_22

First I have to mount the PVS boot iso. Go to the DVD Drive and select the iso.

pvs78_w10_target_23

Now we have to adjust the boot order. Go to BIOS, select the CD and move it to the top of the list. Then click OK.

pvs78_w10_target_25

We can now power on the virtual machine. Connect to the console and check that it is booting from the PVS boot iso and connecting to the PVS server.

pvs78_w10_target_26

Now logon to the virtual machine so the Image Wizard can continue.

pvs78_w10_target_27

The Image Wizard will continue automatically and start with taking a snapshot.

pvs78_w10_target_28

Then the Image Wizard will start the copy process to the PVS server.

pvs78_w10_target_29

After the Image Wizard completed the copy process successfully click on Done.

pvs78_w10_target_30

Time for testing

Now shutdown the virtual machine and disconnect the local “physical” disk, because now we want to start from the newly created vDisk from the PVS server. This has to be done using the hypervisor manager, in my case Hyper-V mmc. Go to settings to remove the locally attached “physical” disk.

pvs78_w10_target_31

Go to IDE Controller 0 and Remove the disk. This will only disconnect it and make it invisible to the virtual machine, the virtual disk file will not be deleted.

pvs78_w10_target_32

When the target device is created on the PVS server, it is set to boot from hard disk. This is done to complete the image proces but can also be used to make changes to the virtual disk. Now we have to tell the target device that is has to boot from the vDisk.

Go to your PVS console and select the Properties from you target device.

pvs78_w10_target_33

In the General tab choose vDisk in the Boot from dropdown menu. Then click on OK.

pvs78_w10_target_34

Also we want to set the Access mode for the vDisk to Standard Image. This is necessary if we want to start multiple virtual machines using the same vDisk (in the future). Go to the vDisk Pool in your PVS console and select the Properties for the vDisk we just made.

pvs78_w10_target_35

In the General tab set the Access mode to Standard Image. Then click OK.

pvs78_w10_target_36

Now it is time to boot the virtual machine and see some PVS magic! Connect to the console of the virtual machine using your hypervisor tools, in my case Hyper-V mmc, so you can see what is happening during boot.

pvs78_w10_target_37

As you can see the virtual machine is booted from my PVS boot iso and logged in to PVS. PVS is accepting the connection and providing the virtual machine with a vDisk.

Logon to the virtual machine to check if the Virtual Disk Status.

pvs78_w10_target_38

In the General tab you can see that the vDisk is now Read Only. This is exactly what we wanted.

pvs78_w10_target_39

In the Statistics tab you can see some diagnostic information.

pvs78_w10_target_40

This concludes this tutorial. Feel free to contact me of you have any questions or comments.

You can also follow me on twitter or add the rss feed from the blog and you will be notified when I add new posts.

Creating a Windows 10 Target Device with Citrix Provisioning Services 7.8 Read More
Create Bootable ISO for target devices

Citrix Provisioning Services create bootable ISO for target devices

Reading Time: 3 minutes

The target devices booting from Citrix Provisioning Services (PVS) server can boot using PXE or using a bootable ISO. I choose to boot my devices using a bootable ISO. This method is very reliable, as it doesn’t rely on PXE services or network connections.

My lab setup:

  • Windows 2012 R2 server running Citrix Provisioning Services 7.8.

In this post I will show you how to:

  • Create a bootable ISO for PVS target devices

Create a bootable ISO for your PVS target devices

Go to the Start Menu and select Provisioning Services Boot Device Manager.

Create Bootable ISO for target devices

 

In my experience many boot related problems can be solved when you enter the IP address of the PVS server here instead of the hostname or fqdn. So I selected Use static ip for the server. Then click on Add.

Create Bootable ISO for target devices

 

Enter the network settings and fill in the IP address of your PVS server. Click on OK.

Create Bootable ISO for target devices

 

Click on Next.

Create Bootable ISO for target devices

 

In the Set Options window enable Verbose Mode. This is very useful in case you have to troubleshoot, and the added boot delay can be neglected. Then click on Next.

Create Bootable ISO for target devices

 

Select Citrix ISO Image Recorder in the dropdown menu and click on Burn.

pvs78_boot_iso_06

 

Choose a location to save the ISO file and click on Save.

pvs78_boot_iso_07

 

When the ISO has been created successfully, click on OK.

pvs78_boot_iso_08

You can now close the Boot Device Management window.

pvs78_boot_iso_09

 

Check that you have the ISO file.

pvs78_boot_iso_10

This concludes this tutorial. Feel free to contact me of you have any questions or comments.

You can also follow me on twitter or add the rss feed from the blog and you will be notified when I add new posts.

Citrix Provisioning Services create bootable ISO for target devices Read More

Setup and configuration of Citrix Provisioning Services 7.8

Reading Time: 6 minutes

Recently Citrix has released Citrix Provisioning Services 7.8 (PVS). I wanted to see how this works, so I decided to set it up in my homelab and share the setup and configuration steps with you guys.

I will be needing this component to stream my desktops and servers. Citrix Provisioning Services (PVS) eliminates the need to manage, update and patch individual systems. Instead it allows us to use a master image to provision computers. This master image (vDisk) can be used simultaneously by multiple computers.

In this post I will show you how to:

  • Install PVS
  • Basic configuration using the PVS wizard
  • Create a PVS farm

My lab setup:

  • Windows 2012 R2 server with patches and updates which I will be using to install PVS
  • Downloaded PVS ISO from www.citrix.com
  • Service Account in Active Directory
  • Local domain (vikash.nl)
  • Domain controller (dc01.vikash.nl)
  • Hypervisor Hyper-V 2012 R2
  • SQL server (sql01.vikash.nl)
  • Citrix License Server (dc01.vikash.nl)
  • All servers running as virtual machines

Install Citrix Provisioning Services 7.8

Mount the ISO to using Hyper-V manager on your virtual server and start the setup. Click on Server Installation.

pvs_78_01

 

The setup wizard will automatically detect the required components and will prompt to install them. Click on Install.

pvs_78_02

 

Click on Yes to install the SQL components.

pvs_78_03

 

Click on Next on the welcome screen.

pvs_78_04

 

Accept the license agreement and click on Next.

pvs_78_05

 

Enter the username and organization name. Select the all users option and click on Next.

pvs_78_06

 

Choose the installation folder. In my case I left this default. Then click on Next.

pvs_78_07

 

Click on Install to start the installation.

pvs_78_08

 

Click on Finish to finish the installation.

pvs_78_09

 

You will get a warning message about the PVS Console. We will install this later. Click on OK.

pvs_78_10

 

Now the Provisioning Services Configuration Wizard will automatically start. Click on Next.

pvs_78_11

 

You will now be prompted to choose a DHCP option. When the PVS server is running DHCP (local service), choose The service that runs on this computer. In my case my DHCP is running on my router, so I choose The service that runs on another computer. Click on Next.

pvs_78_12

 

Choose the PXE options. If your virtual machines will boot using the PXE service, enable this. In my environment I will be using a bootable ISO for all the virtual machines running from PVS. You can see  here how to create a bootable ISO. So I choose The service that runs on another computer and click on Next.

pvs_78_13

 

Now we have to create a new farm since this is my first PVS server. Choose Create farm and click on Next.

pvs_78_14

 

The wizard will create the database now. The active directory account running the configuration wizard should have rights to create the database on the SQL server. Otherwise make sure the database is created beforehand and that you have the correct account to login to the database. Enter the SQL fqdn and click on Next.

pvs_78_15

 

Enter the database name. If this is an existing database, choose the name using the dropdown menu. Make sure to select the correct Active Directory group to manage the PVS server (Farm Administrator group). Enter the other information needed to create the farm and click on Next.

pvs_78_16

 

Select the destination to store the virtual disks for the virtual machines running from PVS. Give it a name and click on Next.

pvs_78_17

 

Enter the license server fqdn. Click on Next.

pvs_78_18

 

Now we have to specify an account for running the PVS service. This will be used to run the Stream and Soap service. Enter the correct information and click on Next.

pvs_78_19

 

The target devices running from PVS cannot update their own password in the Active Directory, so we must enable PVS to do this for us. Make sure this is enabled and click on Next.

pvs_78_20

 

Check the network communication settings for management and streaming. Select the correct interface, check with your network admin in case this is not clear. In my case my PVS server has one NIC. Click on Next.

pvs_78_21

 

Next you will be prompted to enter the TFTP options. Enable it and click on Next.

pvs_78_22

 

Now everything is setup to finish the configuration wizard. Click on Finish.

pvs_78_23

 

If you have Windows Firewall running on your server, you will get a message about that. Make sure you disable it later or open the necessary ports. Click on OK.

pvs_78_24

 

Click on Done after the configuration wizard has finished.

pvs_78_25

 

Install the Citrix Provisioning Services Console

In order to manage Citrix Provisioning Services you need to install the console. Run the setup from the Citrix Provisioning Services ISO and this time click on Console Installation.

pvs_78_26

 

Click Next in the welcome screen.

pvs_78_27

 

Accept the License Agreement and click on Next.

pvs_78_28

 

Enter the Customer Information and click on Next.

pvs_78_29

 

Choose the installation path and click on Next.

pvs_78_30

 

Click on Install to begin the installation.

pvs_78_31

 

After the installation is finished, click on Finish.

pvs_78_32

 

Now go to the Start Menu and start the Provisioning Services Console.

pvs_78_33

 

Right click Provisioning Services Console and click on Connect to Farm….

pvs_78_34

 

Enter the correct fqdn, select Auto-login on application start or reconnect to automatically connect to the PVS server and then click on Connect.

pvs_78_35

 

Now you should be able to manage the PVS server.

pvs_78_36

This concludes this tutorial. Feel free to contact me of you have any questions or comments.

You can also follow me on twitter or add the rss feed from the blog and you will be notified when I add new posts.

 

 

Setup and configuration of Citrix Provisioning Services 7.8 Read More

Basic setup Citrix Provisioning Services 7.6

Reading Time: 6 minutes

So I got some free time now to continue setting up my homelab. I decided to start with a basic setup and configuration of Citrix Provisioning Services 7.6 (PVS). I will be needing this component to stream my desktops and servers. Citrix Provisioning Services (PVS) eliminates the need to manage, update and patch individual systems. Instead it allows us to use a master image to provision computers. This master image (vDisk) can be used simultaneously by multiple computers.

In this post I will show you how to:

  • Install PVS
  • Basic configuration using the PVS wizard
  • Creating a farm

My lab setup:

  • Host running Citrix XenServer 6.5 SP1
  • Windows 2012 R2 server with patches and updates which I will be using to install PVS
  • Downloaded PVS ISO from www.citrix.com
  • Service Account in Active Directory

Install Citrix Provisioning Services 7.6

Using XenCenter mount the ISO on the Windows 2012 Server VM and start the setup. The setup will start. Click on Server Installation.

0_pvs_76_install

If there are additional items to be installed, you will be prompted for them. Click on Install.

1_pvs_76_install

Click on YES.

2_pvs_76_install

Click on Next.

3_pvs_76_install

Accept the License Agreement and click on Next.

4_pvs_76_install

Enter your customer information in the User Name field and the Organization field. Select the option you need for “Install this application for”. Click Next.

5_pvs_76_install

Select the installation folder. In my case I left it default. Click Next.

6_pvs_76_install

Then click on Install to begin the installation.

7_pvs_76_install

Click on Finish the start the configuration wizard.

8_pvs_76_install

You will get a warning about the PVS console not detected on your system. Just click on OK, we will deal with this later.

9_pvs_76_install

The configuration wizards start, click on Next to begin configuration.

10_pvs_76_install

Configure the DHCP options according to your infrastructure. I have selected the option “The service that runs on another server”. Select this option is you have a separate DHCP server installed. Click on Next.

11_pvs_76_install

For the PXE services I have selected “The service that runs on another computer”. This is the scenario I see in most of the cases with customers running PVS. In many cases they have a seperate PXE server running for Thin-Clients. Select the option you see fit for your infrastructure. Click on Next.

12_pvs_76_install

Now we have to create the PVS farm. In another post I will cover the “Join existing farm” option. For now let’s create a new one. Click on Next.

13_pvs_76_install

Enter the information to setup the PVS database on the SQL server. Select the appropriate instance, otherwise leave blank. Click on Next.

14_pvs_76_install

In the New Farm windows enter the information according to your company/infrastructure. It will already suggest the database name. You can change it, or select the appropriate database. I also added the Active Directory Administrators group. Click on Next.

15_pvs_76_install

Enter the Store name and the path where you vDisks will be stored. Click on Next.

16_pvs_76_install

Enter the hostname or ipadress of you licensen server. I also checked the option “Validate license server version and communication”.  Click on Next.

17_pvs_76_install

Enter the service account you created in Active Directory to setup the Stream and Soap services. This service account will also be used to setup the database. Note that this user must have db_writer and db_reader access, so I made this account the owner of the PVS database. Click on Next.

19_pvs_76_install

I use the default to update the computer password in the Active Directory. Click on Next.

20_pvs_76_install

Select the network card for management and streaming, in my case there is only one. Check the communication ports. I left them default. Click on Next.

21_pvs_76_install

I choose not to install TFTP server, as I will be booting using an ISO. This ISO tells my client device (target) where my PVS server is. I will cover this in a later post. Click on Next.

22_pvs_76_install

Check the information on the overview screen. Click on Finish.

23_pvs_76_install

You will get a notification about the firewall. Click on OK.

24_pvs_76_install

Now wait for the wizard to complete the configuration. It should end with all the green checkmarks. Click on Done.

25_pvs_76_install

Install Provisioning Services Management Console

Now we need to install the PVS Console for management purpose. This console can be installed on a remote server (like a management server). I choose to install this on my local PVS server.

Start the setup from the Provisioning Services installation ISO. Click on Console Installation.

26_pvs_76_install

Click on Next in the Welcome screen.

27_pvs_76_install

Accept the license agreement. Click on Next.

28_pvs_76_install

Enter your customer information in the User Name field and the Organization field. Select the option you need for “Install this application for”. Click Next.

29_pvs_76_install

Choose the installation folder. I left mine default. Click on Next.

30_pvs_76_install

Select the setup type. Click on Next.

31_pvs_76_install

We are now ready to install. Click on Install.

32_pvs_76_install

Click on Finish.

33_pvs_76_install

Start the PVS console and enter the information of the PVS server. Click on Connect.

34_pvs_76_install

We now have a working Provisioning Services server. In another post I will show you how to create and configure master images using Provisioning Services.

You can also follow me on twitter or add the rss feed from the blog and you will be notified when I add new posts. If you have any questions feel free to contact me.

Basic setup Citrix Provisioning Services 7.6 Read More